Translate
4.5'' To 6'' Tubular Radius Arm Kit 2019-2024 Ram 2500/3500
· Heavy-duty tubular construction.
· Designed to correct suspension geometry on 4-inch to 6-inch lifted models.
· Helps to correct the caster angle.
· Allows for larger tires to be installed.
· Ease of installation with direct bolt-on design.
· Oversized rubber bushings to better isolate road noise and vibration harshness.
· Heavy-duty tubular construction.
· Designed to correct suspension geometry on 4-inch to 6-inch lifted models.
· Helps to correct the caster angle.
· Allows for larger tires to be installed.
· Ease of installation with direct bolt-on design.
· Oversized rubber bushings to better isolate road noise and vibration harshness.
The new 77-19000 Tubular Radius Arm upgrade kit for the 2019-2024 Ram 2500/3500. These new Radius Arms are heavy-duty and are built to handle the use and abuse demanded out of Ram trucks and serve as critical alignment components, correcting the suspension geometry on lifted models. The arms are formed inward allowing for additional clearance and providing even more space for oversized tires. The direct bolt-on design promotes quick and easy installation.
· Heavy-duty tubular construction.
· Designed to correct suspension geometry on 4-inch to 6-inch lifted models.
· Helps to correct the caster angle.
· Allows for larger tires to be installed.
· Ease of installation with direct bolt-on design.
· Oversized rubber bushings to better isolate road noise and vibration harshness.
Tubular Radius Arms
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.
INSTALLATION ALIGNMENT NOTE: Your vehicle may require alignment after product installation. You may incur additional costs to align the vehicle.
INSTALLATION HEADLAMP AIM NOTE: In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation. You may incur additional costs to adjust the headlamp system.
INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE: If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation. In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS. You may incur additional costs to adjust ADAS systems.
TIRE/WHEEL SIZING GUIDE