Search by Vehicle

Ford Super Duty Auto-Leveling Headlight 3.5''-6'' Lift Bracket Kit

$69.95
In stock
SKU
67-23410

- Fits 2023-UP Ford Super Duty Trucks equipped with onboard scales.

- PN 67-23410 works with ReadyLIFT kits of 3.5” lifts to 6” lifts.

- Relocates auto-leveling headlight sensors for improved tire clearance.


Note: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms.  Read full instructions to set the headlight position before completing installation. 

Have a question? Please call 800-549-4620

TIRE/WHEEL SIZING GUIDE

  • ReadyLIFT is excited to release new Auto-Leveling Headlight Brackets for the 2023-2024 Ford Super-Duty Trucks equipped with the onboard scale option.  ReadyLIFT’s leveling and lift kits for the 2023+ Super-Duty trucks have been a huge success but trucks with the onboard scales need a solution to keep this function working properly without illuminating warning lights.  These new brackets adjust the length and position of the front auto-leveling headlight sensor to the factory radius arms.  The new design moves the sensor towards the rear of the truck allowing for improved tire clearance along with adjusting the travel limits for proper function.  Part number 67-23210 is designed to work with our leveling kits with a front lift up to 2.5” and the 67-23410 works on ReadyLIFT’s kits of 3.5” to 6” kits. 

     

    Features & Benefits:

    ·         Fits 2023-UP Ford Super Duty Trucks equipped with onboard scales.

    ·         PN 67-23410 works with ReadyLIFT kits of 3.5” lifts to 6” lifts.

    ·         Relocates auto-leveling headlight sensors for improved tire clearance.

     

    Note: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms.  Read full instructions to set the headlight position before completing installation. 

  • Frame Bracket, LH

    Frame Bracket, RH

    Radius Arm Bracket, LH

    Radius Arm Bracket, RH

    Hardware Pack

  • SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

     

    INSTALLATION ALIGNMENT NOTE:  Your vehicle may require alignment after product installation.  You may incur additional costs to align the vehicle.

     

    INSTALLATION HEADLAMP AIM NOTE:  In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation.  You may incur additional costs to adjust the headlamp system.

     

    INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE:  If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation.   In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS.  You may incur additional costs to adjust ADAS systems.


    DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
    Estimated Installation Time: 1 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

    Have a certified mechanic do it for you!


Quick Overview

- Fits 2023-UP Ford Super Duty Trucks equipped with onboard scales.

- PN 67-23410 works with ReadyLIFT kits of 3.5” lifts to 6” lifts.

- Relocates auto-leveling headlight sensors for improved tire clearance.


Note: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms.  Read full instructions to set the headlight position before completing installation. 

Details

ReadyLIFT is excited to release new Auto-Leveling Headlight Brackets for the 2023-2024 Ford Super-Duty Trucks equipped with the onboard scale option.  ReadyLIFT’s leveling and lift kits for the 2023+ Super-Duty trucks have been a huge success but trucks with the onboard scales need a solution to keep this function working properly without illuminating warning lights.  These new brackets adjust the length and position of the front auto-leveling headlight sensor to the factory radius arms.  The new design moves the sensor towards the rear of the truck allowing for improved tire clearance along with adjusting the travel limits for proper function.  Part number 67-23210 is designed to work with our leveling kits with a front lift up to 2.5” and the 67-23410 works on ReadyLIFT’s kits of 3.5” to 6” kits. 

 

Features & Benefits:

·         Fits 2023-UP Ford Super Duty Trucks equipped with onboard scales.

·         PN 67-23410 works with ReadyLIFT kits of 3.5” lifts to 6” lifts.

·         Relocates auto-leveling headlight sensors for improved tire clearance.

 

Note: Auto-Leveling Headlight brackets only work with Super Duty stock radius arms.  Read full instructions to set the headlight position before completing installation. 

Kit Components

Frame Bracket, LH

Frame Bracket, RH

Radius Arm Bracket, LH

Radius Arm Bracket, RH

Hardware Pack

Installation

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

 

INSTALLATION ALIGNMENT NOTE:  Your vehicle may require alignment after product installation.  You may incur additional costs to align the vehicle.

 

INSTALLATION HEADLAMP AIM NOTE:  In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation.  You may incur additional costs to adjust the headlamp system.

 

INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE:  If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation.   In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS.  You may incur additional costs to adjust ADAS systems.



DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions
Estimated Installation Time: 1 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

Have a certified mechanic do it for you!