1" Rear Block Kit - Ford Ranger

$149.95

Out of stock

SKU

66-2910

1" Rear Block Lift Kit For 2019-2023 Ford Ranger 4WD OEM style cast iron construction. Includes longer u-bolts and hardware.

ReadyLIFT's Ford Ranger OEM style 1" Rear Block Kits are now available for 2019-2023 Ford Ranger 4WD applications. 26-2910 Rear Block Kit includes two (2)1" Tall Rear Blocks, four (4) E-Coated U-Bolts, eight (8) Nuts and Washers and will safely lift the rear of your 2019-2024 Ford Ranger Truck. Create more rake with the addition of this 1" tall rear block kit. Ideal for when more rear lift is required for towing or hauling. Based on OEM designs and never made out of lightweight extrusions our 1" Rear Lift Blocks are made to fit and have Integrated OEM Style Bump Stop Landings and cast in center pins. ReadyLIFT Block Kits will put a slight rake back in your truck for hauling or towing and are designed to work in concert with your ReadyLIFT Suspension Leveling Kit. In fact, these blocks are the ideal Tow Package upgrade for not only for stock height vehicles but lifted or leveled trucks too! Like all ReadyLIFT products, these block kits come with our Limited Lifetime Warranty. With this new Rear Lift Block, you will never have to illegally stack rear blocks again! Installation time about 1.8 hours
Rear Block Kits include (2) 1" Tall Rear Blocks, (4) E-Coated U-Bolts, (8) Nuts and Washers and will safely lift the rear of your 2019-2022 Ford Ranger Truck.
SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

INSTALLATION ALIGNMENT NOTE: Your vehicle may require alignment after product installation. You may incur additional costs to align the vehicle.

INSTALLATION HEADLAMP AIM NOTE: In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation. You may incur additional costs to adjust the headlamp system.

INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE: If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation. In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS. You may incur additional costs to adjust ADAS systems.

Estimated Installation Time: 1.8 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

Have a certified mechanic do it for you!
Location *
Location
Distributor Name

Quick Overview

1" Rear Block Lift Kit For 2019-2023 Ford Ranger 4WD OEM style cast iron construction. Includes longer u-bolts and hardware.

Details

ReadyLIFT's Ford Ranger OEM style 1" Rear Block Kits are now available for 2019-2023 Ford Ranger 4WD applications. 26-2910 Rear Block Kit includes two (2)1" Tall Rear Blocks, four (4) E-Coated U-Bolts, eight (8) Nuts and Washers and will safely lift the rear of your 2019-2024 Ford Ranger Truck. Create more rake with the addition of this 1" tall rear block kit. Ideal for when more rear lift is required for towing or hauling. Based on OEM designs and never made out of lightweight extrusions our 1" Rear Lift Blocks are made to fit and have Integrated OEM Style Bump Stop Landings and cast in center pins. ReadyLIFT Block Kits will put a slight rake back in your truck for hauling or towing and are designed to work in concert with your ReadyLIFT Suspension Leveling Kit. In fact, these blocks are the ideal Tow Package upgrade for not only for stock height vehicles but lifted or leveled trucks too! Like all ReadyLIFT products, these block kits come with our Limited Lifetime Warranty. With this new Rear Lift Block, you will never have to illegally stack rear blocks again! Installation time about 1.8 hours

Kit Components

Rear Block Kits include (2) 1" Tall Rear Blocks, (4) E-Coated U-Bolts, (8) Nuts and Washers and will safely lift the rear of your 2019-2022 Ford Ranger Truck.

Installation

SAEJ2492 WARNING: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or rollover during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner's manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

INSTALLATION ALIGNMENT NOTE: Your vehicle may require alignment after product installation. You may incur additional costs to align the vehicle.

INSTALLATION HEADLAMP AIM NOTE: In addition to your vehicle alignment, for your safety and others, it is necessary to check and adjust your vehicle headlamps for proper aim and alignment after product installation. You may incur additional costs to adjust the headlamp system.

INSTALLATION ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS) NOTE: If your vehicle is equipped with active or passive safety/collision monitoring and/or assistance/avoidance systems including, but not limited to, camera- or radar/sonar-based systems, check and adjust your vehicle’s systems for proper aim and function after product installation. In some instances, your vehicle may require OEM dealer service tools and factory-trained technicians to re-calibrate ADAS. You may incur additional costs to adjust ADAS systems.

DO IT YOURSELF: Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation. Download Pdf Instructions

Estimated Installation Time: 1.8 Hours +/- 0.5 hours (excluding alignment and wheel/tire assembly)

Have a certified mechanic do it for you!

TIRE/WHEEL SIZING GUIDE

LEVELING KITS

SST LIFT KITS

BIG LIFT KITS

UPPER CONTROL ARMS

REAR LIFT

SUPER DUTY LIFT KITS

SUBARU LIFT KITS

JEEP SUSPENSION

LOAD LEVELING KITS

LOGIQ AIRIQ SYSTEMS

SHOCKS

ACCESSORIES

TOOLS

GARAGE SALE

Shop All Parts

1" Rear Block Kit - Ford Ranger

Have a certified mechanic do it for you!

Have a certified mechanic do it for you!